Επιλέξτε σελίδα

Τιμόνι Rack και Pinion

Rack and pinion steering is a steering mechanism used in vehicles, typically automobiles, to convert the rotational motion of the steering wheel into linear motion that controls the movement of the wheels. It consists of a toothed bar called the rack and a small gear known as the pinion. When the driver turns the steering wheel, the rotational motion is transferred to the pinion gear, which engages with the teeth on the rack, causing it to move laterally.

Κατηγορία: Ετικέτα:

Rack and pinion steering is a steering mechanism used in vehicles, typically automobiles, to convert the rotational motion of the steering wheel into linear motion that controls the movement of the wheels. It consists of a toothed bar called the rack and a small gear known as the pinion. When the driver turns the steering wheel, the rotational motion is transferred to the pinion gear, which engages with the teeth on the rack, causing it to move laterally. This motion of the rack is then transmitted to the steering linkage, resulting in the wheels turning in the desired direction. Rack and pinion steering is known for its simplicity, responsiveness, and direct control, making it a popular choice in modern automotive systems.

σύστημα διεύθυνσης και γραναζιού

Τεχνικές προδιαγραφές
Κατάλληλο όχημα Οχήματα ATV, Quadbike και FSAE/SUPRA
Μήκος ράφι 14 ιντσών
Αναλογία διεύθυνσης 7:1
Rack Travel 4.25 ιντσών
Κλείδωμα για Κλείδωμα 3 γυρίζει
Ταξίδι 2.09 ίντσες ανά στροφή
Πιονίο OD 1 ιντσών
Μήκος 12 ιντσών
Πλάτος 3 ιντσών
Ύψος 2 ιντσών
Βάρος 1.656 kg
Υλικά
Rack Pinion Σκληρυμένο χάλυβα
Θήκη αλουμίνιο
  • Περίβλημα αλουμινίου και τσουγκράνα από σκληρό χάλυβα με άκρα με σπείρωμα για τοποθέτηση άκρων ράβδων
  • Υπέρβαση των επιπέδων ανθεκτικότητας των συστημάτων διεύθυνσης OEM
  • Προσφέρει ανώτερη αίσθηση δρόμου σε σχέση με τα συστήματα διεύθυνσης OEM χάρη στον απλό και αποτελεσματικό σχεδιασμό του.

Για να ανταποκριθούμε στις ποικίλες απαιτήσεις των σεβαστών πελατών μας, είμαστε ιδιαίτερα αφοσιωμένοι στην παροχή μιας μεγάλης γκάμα συστημάτων διεύθυνσης Rack And Pinion.

σύστημα διεύθυνσης και γραναζιού

Here's an explanation of how rack and pinion steering works:

Rack and pinion steering is a type of steering mechanism commonly used in automobiles to convert the rotational motion of the steering wheel into lateral motion of the wheels. Here's an explanation of how rack and pinion steering works:

The rack and pinion steering system consists of two main components: the rack and the pinion. The rack is a long, flat, toothed bar that is connected to the steering column. The pinion is a small gear attached to the end of the steering shaft.

When the driver turns the steering wheel, the rotational motion is transferred to the pinion gear. As the pinion gear rotates, it engages with the teeth on the rack, causing the rack to move laterally.

The rack is connected to the steering linkage, which is responsible for transmitting the motion to the wheels. As the rack moves, it pushes or pulls the steering linkage, which ultimately turns the wheels in the desired direction.

To ensure smooth and controlled steering, the rack and pinion system incorporates a power assist mechanism. This can be in the form of hydraulic power steering or electric power steering. The power assist provides additional force to make steering easier, particularly at low speeds or during tight maneuvers.

σύστημα διεύθυνσης και γραναζιού

Εφαρμογές

1. Automobiles: Rack and pinion steering is widely used in passenger cars, trucks, and other road vehicles. It is the most common type of steering mechanism found in modern vehicles due to its efficiency, compact design, and precise control.

2. Light Commercial Vehicles: Rack and pinion steering is also employed in light commercial vehicles such as vans, delivery trucks, and pickup trucks. These vehicles benefit from the responsiveness and maneuverability provided by rack and pinion steering.

3. Recreational Vehicles: Many recreational vehicles, including RVs, campervans, and motorhomes, utilize rack and pinion steering for their steering systems. This enables better handling and control while navigating various road conditions.

4. Agricultural and Industrial Equipment: Rack and pinion steering systems find application in agricultural machinery, such as tractors and combine harvesters, as well as in industrial equipment like forklifts and material handling vehicles. These systems offer precise steering control, allowing operators to navigate challenging terrain or confined spaces.

5. Power Assistance: Rack and pinion steering systems can be equipped with power assistance, either through hydraulic power steering or electric power steering. Power-assisted rack and pinion steering systems enhance steering ease and comfort, particularly at low speeds or during parking maneuvers.

σύστημα διεύθυνσης και γραναζιού

To install and maintain rack and pinion steering, here are the steps and considerations to keep in mind:

Εγκατάσταση:

1. Select the Right Components: Ensure that you have the correct rack and pinion steering system that is compatible with your vehicle's make and model. Refer to the manufacturer's guidelines or consult a professional if needed.

2. Prepare the Vehicle: Park the vehicle on a level surface and engage the parking brake. Raise the front end of the vehicle using appropriate lifting equipment, following safety procedures.

3. Remove Old Steering Components: Disconnect the battery to prevent any accidental electrical issues. Remove any components that obstruct access to the steering system, such as the tie rods, steering shaft, and old steering gear.

4. Install the Rack and Pinion Assembly: Position the new rack and pinion assembly in place, ensuring proper alignment with the steering linkage. Follow the manufacturer's instructions for securing the assembly and tightening the mounting bolts to the specified torque.

5. Reconnect Steering Components: Reattach the tie rods, steering shaft, and any other components that were removed. Follow proper procedures for tightening nuts and bolts, ensuring proper alignment and torque specifications.

6. Bleed and Test the System: If the rack and pinion steering system has hydraulic power assist, bleed the system according to the manufacturer's instructions. Test the steering system by turning the steering wheel from lock to lock to ensure smooth operation and proper alignment.

Συντήρηση:

1. Regular Inspection: Routinely inspect the rack and pinion steering components for any signs of wear, damage, or leaks. Check for loose or worn-out parts, including tie rods, bushings, and mounting brackets.

2. Lubrication: Follow the manufacturer's recommendations for lubrication points on the rack and pinion steering system. Apply the appropriate lubricant to ensure smooth operation and reduce wear.

3. Fluid Level Check: If the rack and pinion steering system has hydraulic power assist, regularly check the power steering fluid level. Top up the fluid as needed, using the recommended type specified by the manufacturer.

4. Alignment Check: Periodically have the vehicle's wheel alignment checked by a professional. Improper alignment can put additional strain on the rack and pinion steering system, leading to premature wear and compromised handling.

5. Prompt Repairs: If you notice any abnormal steering behavior, such as excessive play, difficulty in turning, or unusual noises, have the system inspected and repaired promptly to prevent further damage or compromised safety.

6. Follow Manufacturer's Guidelines: Always refer to the manufacturer's maintenance instructions and schedule for specific guidelines on servicing and maintaining your rack and pinion steering system.

 

σύστημα διεύθυνσης και γραναζιού

How to select the right rack and pinion steering?

1. Vehicle Compatibility: Ensure that the rack and pinion steering system is specifically designed for your vehicle's make and model. Check with the manufacturer or consult a professional to determine compatibility.

2. Steering Ratio: Consider the desired steering ratio for your vehicle. The steering ratio determines how much the wheels turn in response to a given input from the steering wheel. Different vehicles may require different steering ratios based on their size, weight, and intended use.

3. Power Assist Options: Decide whether you want a manual rack and pinion steering system or one with power assistance. Power-assisted systems, such as hydraulic power steering or electric power steering, provide easier steering effort, particularly at low speeds or during parking maneuvers.

4. Quality and Durability: Look for rack and pinion steering systems from reputable manufacturers known for their quality and durability. Consider reviews, ratings, and recommendations from professionals or fellow vehicle owners.

5. OEM or Aftermarket: Decide whether you prefer an original equipment manufacturer (OEM) rack and pinion steering system or an aftermarket option. OEM systems are designed specifically for your vehicle's brand and model, while aftermarket systems may offer different features or modifications.

6. Budget: Consider your budget for the rack and pinion steering system. Prices can vary based on brand, features, and quality. However, it's important to prioritize quality and compatibility over cost to ensure proper functioning and safety.

7. Professional Advice: If you are unsure about selecting the right rack and pinion steering system, consult with a professional mechanic or automotive specialist. They can provide guidance based on your specific vehicle and requirements.

σύστημα διεύθυνσης και γραναζιού

Rack and pinion steering factory

Πρόσθετες πληροφορίες

επεξεργασία

by hyw

Γρήγορη λεπτομέρεια προϊόντος:

  • Τυπικό και μη τυπικό διαθέσιμο
  • Με υψηλή ποιότητα και ανταγωνιστική τιμή
  • Έγκαιρη παράδοση
  • Συσκευασία σύμφωνα με τη ζήτηση του πελάτη.

Υποσχόμαστε ότι θα προσφέρουμε την καλύτερη τιμή από την υψηλή ποιότητα στην Κίνα! Δεχόμαστε επίσης ειδική παραγγελία για τα προϊόντα. Εάν ενδιαφέρεστε για τα προϊόντα μας. Μην διστάσετε να μας ενημερώσετε. Είμαστε στην ευχάριστη θέση να σας δώσουμε τις λεπτομερείς πληροφορίες. Υποσχόμαστε ότι τα προϊόντα μας θα ήταν ασφάλεια και ήταν σε υψηλή ποιότητα και λογική τιμή. Εάν ενδιαφέρεστε για τα προϊόντα μας, παρακαλούμε επικοινωνήστε μαζί μας το συντομότερο δυνατόν. Αναζητούμε ειλικρινά τη συνεργασία σας.

Τα περισσότερα από τα προϊόντα μας εξάγονται σε Ευρώπη ή Αμερική, τόσο διαθέσιμα τυποποιημένα όσο και μη τυπικά προϊόντα. Μπορούμε να παράγουμε σύμφωνα με το σχέδιο ή το δείγμα σας. Το υλικό μπορεί να είναι στάνταρ ή σύμφωνα με το ειδικό αίτημά σας. Εάν μας επιλέξετε, θα επιλέξετε αξιόπιστο.

έκθεση ποιότητας προτύπων

Διαθέσιμα υλικά

1. Ανοξείδωτο ατσάλι: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Ορείχαλκος: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Χάλκινο: C51000, C52100, C54400, κλπ
5. Σίδηρος: 1213, 12L14,1215
6. Αλουμίνιο: Al6061, Al6063
7. ΚΑΕ σύμφωνα με το αίτημά σας
διαθέσιμα υλικά προϊόντων

Επιφανειακή επεξεργασία

Ανόπτηση, φυσικοποίηση, θερμική επεξεργασία, στίλβωση, επένδυση νικελίου, επιχρωμίωση, επιμετάλλωση ψευδαργύρου, κίτρινη παθητικοποίηση, χρυσή παθητικοποίηση, σατέν, Μαύρη επιφάνεια βαμμένη κ.λπ.

Μέθοδος επεξεργασίας

CNC κατεργασία, διάτρηση, στροφή, άλεση, διάτρηση, άλεση, διάνοιξη, συγκόλληση και συναρμολόγηση
φινίρισμα προϊόντων

QC και πιστοποιητικό

Τεχνικοί αυτοέλεγχος στην παραγωγή, τελικός έλεγχος πριν από το πακέτο από επαγγελματία επιθεωρητή ποιότητας
ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009

Πακέτο & Χρόνος παράδοσης

Μέγεθος: Σχέδια
Ξύλινη θήκη / δοχείο και παλέτα, ή σύμφωνα με τις προσαρμοσμένες προδιαγραφές.
15-25days δείγματα. Παραγγελία 30-45 ημερών
Λιμάνι: Λιμάνι Σαγκάη / Νίνγκμπο
πακέτα προϊόντων