Επιλέξτε σελίδα

Προμηθευτής Zs κατασκευασμένος στην Κίνα - ανταλλακτικά - σε Enugu Nigeria Τιμή εργοστασίου Υψηλής ακρίβειας σύνδεσμος άξονα για μηχανές αυτοματισμού με κορυφαία ποιότητα

Zs Supplier Made in China – Replacement Parts in Enugu Nigeria – High Precision Jaw Shaft Coupling for Automation Machinery

Εισαγωγή

The high precision jaw shaft is a three-piece design consisting of two aluminum hubs press fit onto a center disk. Torque transmission is achieved by mating the slots on the center disk to the drive tenons on the hubs. During operation, the center disk slides on the tenons of each hub (which are orientated ninety degrees apart) to transmit torque.

Although the couplings accommodate a small amount of angular and axial misalignment, they are particularly useful in applications with parallel misalignment. We offer oldham couplings in set screw or clamp designs with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp type, keyed, or keyless) are interchangeable and can be mixed into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for enhanced lubricity, improved life, and reduced inertia. Hubs are also available in stainless steel upon request for increased corrosion resistance.

Συνηθισμένα σενάρια χρήσης

  • Light duty industrial and motion control applications
  • Acts as a torque limiter during overload
  • Electrical isolation due to the non-conductive nature of the center disk

Oφέλη

  • High absorption capacity of radial misalignment
  • Does not create kinematic errors in transmission
  • Εξάλειψη των φορτίων στον άξονα
  • Mechanical stability against excessive torque
  • Replaceable disk

Υλικά που μπορούν να χρησιμοποιηθούν με το προϊόν

The high precision jaw shaft coupling can be used with a variety of materials such as steel, aluminum, and plastic.

Εγκατάσταση, συντήρηση και επισκευή

Installation: The high precision jaw shaft coupling should be installed by a qualified professional. Proper alignment is necessary for the coupling to function correctly.

Maintenance: Regular inspection and cleaning of the coupling is necessary to ensure proper operation. Lubrication is also recommended.

Repair: If the coupling is damaged, it should be replaced immediately to prevent further damage to machinery.

Ιστορία και κατηγοριοποίηση

The high precision jaw shaft coupling has been used in industrial and motion control applications for many years. It falls under the category of couplings and is a type of oldham coupling.

Προώθηση της επιχείρησης προϊόντων της EVER-POWER GROUP

At EVER-POWER GROUP, we are committed to providing quality products, favorable prices, and attentive service to our customers. We welcome you to visit us and customize your orders. Our products are manufactured with precision and rigorously tested to ensure optimal performance. Trust us for all your coupling and ανάγκες.

FAQ

1. What sizes do the oldham couplings come in?

The oldham couplings come in set screw or clamp designs with bores ranging from 4mm to 35mm.

2. Can the oldham coupling hubs be interchanged?

Yes, inch and metric hubs (set screw, clamp type, keyed, or keyless) are interchangeable and can be mixed into a single coupling as long as they have the same outside diameter.

3. What are the benefits of using the high precision jaw shaft coupling?

The high precision jaw shaft coupling has a high absorption capacity of radial misalignment, does not create kinematic errors in transmission, eliminates loads on the shaft, provides mechanical stability against excessive torque, and has a replaceable disk.

4. What materials can be used with the high precision jaw shaft coupling?

The high precision jaw shaft coupling can be used with a variety of materials such as steel, aluminum, and plastic.

5. How should the high precision jaw shaft coupling be installed?

The high precision jaw shaft coupling should be installed by a qualified professional. Proper alignment is necessary for the coupling to function correctly.

Note: All the content of this page is from the internet and is only for reference when selecting products. We are not the original trademark holder. Our products are only applicable to aftermarket replacement parts rather than original parts. If you need to buy original spare parts, please contact the original factory to buy.

Επικοινωνήστε μαζί μας για περισσότερες πληροφορίες → https://www.ever-power.net/contact-us/

Είστε πάντα ευπρόσδεκτοι να ζητήσετε οποιαδήποτε πληροφορία! Παρακαλώ μη διστάσετε να επικοινωνήσετε μαζί μας!

ΥΛΙΚΑ ΔΙΑΘΕΣΙΜΑ

1. Ανοξείδωτο ατσάλι: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Ορείχαλκος: C36000 (C26800), C37700 (HPb59), C38500 (HPb58), C27200 (CuZn37), C28000 (CuZn40)
4. Χάλκινο: C51000, C52100, C54400, κλπ
5. Σίδηρος: 1213, 12L14,1215
6. Αλουμίνιο: Al6061, Al6063
7. ΚΑΕ σύμφωνα με το αίτημά σας

ΕΠΙΦΑΝΕΙΑΚΗ ΕΠΕΞΕΡΓΑΣΙΑ

Ανόπτηση, φυσικοποίηση, θερμική επεξεργασία, στίλβωση, επένδυση νικελίου, επιχρωμίωση, επιμετάλλωση ψευδαργύρου, κίτρινη παθητικοποίηση, χρυσή παθητικοποίηση, σατέν, Μαύρη επιφάνεια βαμμένη κ.λπ.

ΜΕΘΟΔΟΣ ΕΠΕΞΕΡΓΑΣΙΑΣ

CNC κατεργασία, διάτρηση, στροφή, άλεση, διάτρηση, άλεση, διάνοιξη, συγκόλληση και συναρμολόγηση

QC & ΠΙΣΤΟΠΟΙΗΤΙΚΟ

Τεχνικοί αυτοέλεγχος στην παραγωγή, τελικός έλεγχος πριν από το πακέτο από επαγγελματία επιθεωρητή ποιότητας

ISO9001: 2008, ISO14001: 2001, ISO / TS 16949: 2009

ΠΑΚΕΤΟ & ΧΡΟΝΟΣ ΛΕΙΤΟΥΡΓΙΑΣ

Μέγεθος: Σχέδια

Ξύλινη θήκη / δοχείο και παλέτα, ή σύμφωνα με τις προσαρμοσμένες προδιαγραφές.

15-25days δείγματα. Παραγγελία 30-45 ημερών